Mermaid Scales – New

Sizes:

12 x 12 (Adhesive, HTV)

12 x 18 (Glitter HTV)

About Our Vinyl Materials:

Offered in either adhesive permanent vinyl, heat transfer vinyl* or glitter htv**

Adhesive:  Our adhesive is a glossy permanent adhesive, and is great for car and cup decals, but is not recommended for walls. Crafters love this adhesive for its bubble-free application and how smoothly it cuts on Silhouette, Cricut and other desktop plotters.

Heat Transfer:  SparkleBerry HTV is the best patterned heat transfer out there! Its semi-gloss finish is vibrant, easy to weed and adheres to fabric like a dream! Recommended: Medium Tack Magic Mask for transfer of design to garment.

*One complimentary Medium Tack Magic Mask is included with each patterned heat transfer vinyl order.  If you need more than one sheet included in your order, they are available for purchase here.

Glitter Heat Transfer: 12″ x 18″ The glitter/shimmer finish provides a unique look that is sure to please! Recommended Mask: High Tack Magic Mask.

**High Tack Mask in NOT included with orders of Glitter HTV.  Purchase High Tack Mask for Patterned Glitter HTV here.

All Images are property of SparkleBerry Ink.  Do not copy, print, or otherwise disseminate without express written permission from SparkleBerry Ink or its agents.

HTV Application Instructions: (heat press)

• First, cut and weed material
• Next, mask with Magic Mask – Medium Tack
• Use mask to peel design from backer
• Apply design at 295°F/146°C with medium pressure for 15 seconds
• Finally, peel hot

HTV Application Instructions:  (home iron) 

• First, cut, weed material
• Next, mask design using Magic Mask – Medium Tack
• Use mask to peel design from backer.
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet (Teflon)
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Finally, peel carrier hot or cold

Glitter HTV: Application Instructions: (heat press)

• First, cut and weed material
• Next, mask with Magic Mask – High Tack
• Apply design at 302°F/150°C with medium pressure for 12 seconds
• Finally, peel hot